Home > Shop by Manufacturer >

Heated Hose. 2000psi, 3/8" x 50' with Thermocouple Wire.
2000psi 50ft PMC Heated Hose
 
Alternative Views:
Retail Price: $2,513.00
Uses Leasable


Product Code: PMC-200006
Qty:

Description
 

PMC 2000 PSI Heated Hose Set

For a low pressure heated hose to run your foam spray gun,

take a look at this 50' X 3/8", 2000 psi heated SPF hose. This spray foam heated hose is as tough as they come
compared to anything else out there.

This heated hose with thermocouple wire employs the use of a braided copper wire

wrap for heating. The wiring is in contact with about 85% of the hose surface, compared to the average 35% of
other hoses such as the typical ribbon wire heated hose. And while built to take pretty much anything you can
dish out at the job site.
Features
Low Pressure - 2000psi. Braided heater wire surrounds the hose and is encapsulated inside to prevent any moisture from contacting the heater braid. Heater braid provides an 85% coverage of the hose compared to 35% of the ribbon heater wire.
PVC Protective Extruded Jacket, Heater and thermocouple wire, 3 pin connector, heater wire connecting block and fittings included.
Scuff Jacket - Order 246077 Scuff Jacket. 50' lengths.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop by Manufacturer
Parts
Heated Hose and Fittings by PMC and Graco
Heated Hose and Fittings by PMC and Graco > Heated Spray Foam Hose Sets
Shop by Manufacturer > PMC Polymac Equipment
Parts > Parts for PMC AP2, AP3, PX7