PMC RTD Assembly Replacement Temperature Sensing Unit

While many may give the thumbs up to the Graco brand for some of the best spray parts available, when it comes to replacing your four wire RTD (resistance temperature detector), you might consider going to an aftermarket solution such as the PMC RTD temperature sensing unit. As good or better quality as the OEM unit, this RTD replacement to Graco 24K207 is currently marked down an additional 25+ percent from our everyday discounted price.

Your Graco Reactor 2 Series temperature sensing unit will eventually require replacement. Whether you're shooting with a Graco E20i, E30i or Xpi, this PMC RTD will replace your Reactor 2 Series RTD assembly. It can be ordered as a stand-alone, single part or as part of a 50' hose assembly. For the very best value in spray foam resistance temperature detectors, you can count on the experts at SPF Depot to deliver.

PMC Heated Hose Whip

High pressure heated hose for use with guns spraying foam and various other coatings isn't cheap to buy, and anything that will increase the life of these often-abused pieces of hardware can save you hundreds or thousands of dollars. This 10' X 1/4 " spray foam heated hose from PMC has been upgraded by SPF Depot with the addition of an encapsulating rubber jacket as a means of damage protection and moisture resistance. This takes an already extremely durable whip hose and, for an extra 20 bucks, makes it several times better able to hold up to the type of wear & tear these parts typically suffer.

This 3500 psi heated SPF hose has everything the underlying product has quick, even heating from the braided copper wrap and tough PVC jacket. This heated hose with thermocouple wire works with Graco, GlasCraft, PMC and Gusmer guns. For the Xtreme-Guard JACKET ONLY - See part# 24T244. Sold in 10' and 50' rolls. Saves you thousands due to the longer life of the hose.

Heated Hose 3500psi 3/8 x 50' Thermocouple Wire

Maintain the correct temperature of plural spray foam components with PMC-USA/Polymac spray foam heated hose. Ideal for high-pressure and large jobs, this 3500 psi x 50 heated SPF hose is a top seller with our spray foam insulation, roofing and spray-on truck liner customers. A quality high- pressure heated hose not only feeds the spray gun but also results in better foam and polyurea application. This heated hose with thermocouple wire is compatible with PMC-USA/Polymac spray guns.

PMC 2000 PSI Heated Hose Set

For a low pressure heated hose to run your foam spray gun,

take a look at this 50' X 3/8", 2000 psi heated SPF hose. This spray foam heated hose is as tough as they come compared to anything else out there.

This heated hose with thermocouple wire employs the use of a braided copper wire

wrap for heating. The wiring is in contact with about 85% of the hose surface, compared to the average 35% of other hoses such as the typical ribbon wire heated hose. And while built to take pretty much anything you can dish out at the job site.