High Temp O-Ring Lube
Proprietary Product of SPF Depot. O-Ring Lubricant. Superior to the OEM product.
Custom blend MADE SPECIFICALLY for spray foam and polyurea applications.
(4)
ChemTrend Spray Foam Silicone Spray Release 1 can
ChemTrend Release Agents for Polyurethane. Spray Foam Silicone Spray Release Coatings for Polyurethane provide highly effective release properties for all cast elastomers, rigid and flexible foams. The coatings adhere to all mold surfaces such as, aluminum, steel, urethane, epoxy, and fiberglass.
Single Can
GROUND Shipping Only
SPF-6 Foam Solvent
1 Gallon cleans over 200 guns. SPF-6 Solvent melts the cured product, so that's what is used to clean your guns. DO NOT USE ON PLASTICS. This stuff melted my plastic jar, so don't put this on your face shields.
Available ONLY from SPF Depot.
(7)
Pump Lube. 1 Gallon Can
SPF-PL Pump Lube is an environmentally safe alternative for pump maintenance and pump storage. SPF-PL acts as a substitute for the hazardous plasticizers currently used. Fill your lines and proportioner with SPF-PL when storing your rig for the winter to help maintain your Spray Foam Rig. Flush out with SPF-5 when you restart your rigs.
SPF-5 Hose and System Flush - Sold in 1 & 5 Gallon
Safest Hose Flush agent in the market. SPF-5 is more environmentally friendly than other brands to flush out your ISO lines and break up the internal ISO buildup. Simply fill the line, let it sit for 2 hours and repeat this cycle 3 more times. 1 Gallon is list but that is only for a Graco E10 most other machines will need 5 Gallons.1 gallon for transfer pump and line, 2 to 3 gallons for spray machine, and 1 gallon per 100 ft of a side hose.
(3)
ChemTrend Spray Foam Silicone Spray Release 12 can case
ChemTrend Release Agents for Polyurethane. Spray Foam Silicone Spray Release Coatings for Polyurethane provide highly effective release properties for all cast elastomers, rigid and flexible foams. The coatings adhere to all mold surfaces such as, aluminum, steel, urethane, epoxy, and fiberglass.
12 can case
GROUND Shipping Only
Drum Heater Blanket for 55 Gal.
55-Gallon Drum Heater Jacket
Winter is on the way! Drum heater jackets are the best way to avoid spray foam temperature problems while you are on the job. Utilizing a honeycomb heater wire design, this barrel heater blanket ensures that there is even heat distribution throughout the barrel. This smart design also speeds up heating times so you wont have to wait around. Once the drum heater jacket reaches the desired temperature, it will maintain that temperature so you wont have to worry about it overheating.
Our NEW Heater Blanket. The honeycomb heater design provides a greater coverage area for faster heating times. Unlike other brands, our honeycomb design heater wires don't break when drums bang against each other.
- Outfitted with a GFCI for extra security for both the product and user
- High Efficiency Carbon Heating Grid evenly distributes heat over the entire blanket area
- Heating element, unlike others, decreases current as temperature increases
- Constructed of Heavy Duty Vinyl that is NFPA Certified Flame Retardant
- Blankets are outfitted with adjustable retaining straps and quick release plated buckles
- Vinyl Panel Perimeters are sealed with a fully welded seam
- 122f Set point is standard. Available with 158f setting
